※ 引述《bluestar99 (藍色微笑)》之銘言：
: 各位午安，我最近買了新喇叭，
: 想說再買個音效卡搭配一下，
: 因為主機板沒空間插PCIe只好選USB音效卡，
: 以後買遊戲主機也可以共用
: 於是選擇了下面兩款。
: Creative SOUND BLASTER G6 (USB外接音效卡)
: Creative GigaWorks T40II
: 目前電腦直接接到T40II是沒有問題的，
: 但是G6我的電腦好像讀不到，安裝了驅動程式卻顯示這畫面，
: https://i.imgur.com/q5oFrJc.jpg
: 主機板是B85M-G
https://support.creative.com/kb/ShowArticle.aspx?sid=200075&c
The LEDs on the Sound BlasterX G6 are good indicators whether the sound card
is receiving power and being detected by your computer.
先看USB音效盒電源燈是否正常顯示供電
Due to some external factors, computers may still not detect the sound card
even if the LEDs are illuminated:
USB port - It is recommended to connect the Sound BlasterX G6 directly to the
USB 2.0/3.0 port of your computer. Connecting the sound card to a USB hub may
yield some unforeseen issues. Try to connect the sound card to a known
working USB port to further isolate the problem.
把每個USB都測看看...
USB cable - Use the bundled USB cable to ensure detection of the sound card.
The bundled USB cable also works as a data cable.
你應該是用原廠線 這應該不是這問題
Firmware - The firmware of the sound card may be corrupted or the sound card
was in Recovery mode. The firmware upgrade process might have been
interrupted by accidental disconnection of the device. Possible causes
include but not limited to, loose contact on USB cable or port, power
failure, unintended computer shutdown or reboot, or interruptions caused by
Windows update of USB controller driver.
韌體.....感覺應該也不是這問題 這個機會很小
https://www.reddit.com/r/SoundBlasterOfficial/comments/amgkgn/
sound_blasterx_g6_not_detected_by_sound_blaster/
這個人跟你依樣偵測不到
他的解決方法是........進安全模式安裝驅動然後就找到了:
SOLVED IT. Had to dust off from troubleshooting options from over a decade
ago, but I solved it.
I eventually got an error during a series of desperate reinstalls of the
driver: "This operation requires an interactive windows station." Long story
short, booting into Safe Mode and installing the driver fixed all of my
issues. No reinstalling Windows, no messing around with ownership permissions
in system32, just a few clicks to get into Safe Mode.
It seems that problems with the driver are oddly common with the G6; maybe it
would be good for a help page somewhere to suggest this as a step, even
though Safe Mode is fairly basic troubleshooting.
你可以試看看....