作者:
csyow (Yow)
2014-06-10 17:20:21感謝S大的資訊~
不過修改後測試還是只有40M.... Orz
#ethtool eth0 的結果如下：
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: No
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 24
Transceiver: internal
Auto-negotiation: off
Current message level: 0x00000001 (1)
Link detected: yes
裡面比較不一樣的是 Port: MII
而不是 Port: Twisted Pair
請問 MII 是指什麼呀？
只能跑到40M會是這個關係嗎？
※ 引述《sigurose (勝利玫瑰。)》之銘言：
: Cent OS5 可以開啟電腦的 /etc/rc.local 檔案，將下面的指令寫入/etc/rc.local 中，
: 讓 eth1 設置為100Mbps全雙工，關閉 auto。存檔後重開機會自動執行，再測試看看速度
: 是否有改善。
: #ethtool -s eth0 autoneg off
: #ethtool -s eth0 speed 100
: #ethtool -s eth0 duplex full
: #ethtool eth0
: Settings for eth0:
: Supported ports: [ TP ]
: Supported link modes: 10baseT/Half 10baseT/Full
: 100baseT/Half 100baseT/Full
: 1000baseT/Half 1000baseT/Full
: Supports auto-negotiation: Yes
: Advertised link modes: 10baseT/Half 10baseT/Full
: 100baseT/Half 100baseT/Full
: 1000baseT/Half 1000baseT/Full
: Advertised auto-negotiation: No
: Speed: 100Mb/s
: Duplex: Full
: Port: Twisted Pair
: PHYAD: 0
: Transceiver: internal
: Auto-negotiation: on
: Supports Wake-on: g
: Wake-on: d
: Current message level: 0×00000037 (55)
: Link detected: yes