http://madshi.net/madVR.zip
madVR v0.92.0
Code:
* added new "display modes" -> "custom modes" settings tab
* added support for native D3D11 DXVA hardware decoding (needs nightly LAV)
* added support for outputting 10bit in fullscreen windowed mode (win10)
* added optimized "let madVR decide" HDR configuration option
* added support for AMD's private HDR switching API
* added workaround for make Nvidia's private HDR switching API work better
* added full-size EDID block reading (256 bytes instead of just 128)
* added extended EDID parsing
* improved frame drop/repeat estimates for xx/1.001 hz modes
* fixed: deinterlacing of P010 software decoded videos was broken
madVR v0.92.1
* fixed: depending on madVR settings, v0.92.0 crashed right at initialization
* fixed: "display modes" were listed twice in the settings dialog
放出沒多久就發現BUG秒更新...
這版拖很久阿...
主要更新我看大概是如下
有錯誤的地方請指證...
1.這次增加能設定螢幕的更新頻率
使用了Nvidia，AMD和Intel的三家GPU API
不會像Reclock那種同步模式犧牲音質重採樣
能辦到完美流暢的撥放
可使用23~25hz模式撥放影片
給不想補幀的人使用
但我想也要螢幕能開
還是有點BUG...
自訂模式教學
http://madvr.com/crt/CustomResTutorial.html
實際上真的是不錯的東西
可以透過撥放影片找到最佳化的時序
2.增加了native D3D11 DXVA
需要使用needs nightly LAV Filters
https://files.1f0.de/lavf/nightly/
硬解品質說已經跟軟解一樣...效率比D3D9高
3.還有全螢幕視窗可以輸出10bit了(Win10&8.1限定)
這個模式真是方便多了...
但我測試
反而選全螢幕獨佔模式
軟體會崩潰...
4.讓madVR自己決定HDR配置
5.支援AMD自己的HDR切換API
使用條件嚴苛了點
需要在10bit的D3D11全螢幕模式下才會開啟
Nvidia的API能在窗口模式 8bit D3D11或者D3D9下執行
但要看完整的HDR還需要有螢幕跟片源