VMware Workstation 跳出memory錯誤 強制關閉虛擬主機
cpu:I5-2400
記憶體:12G
硬碟1T C:剩129/總199
虛擬設定
記憶體:2G/4G
硬碟 60G
在運作VM時會隨機性跳出錯誤 如下圖
http://i.imgur.com/TscFAZd.jpg
http://i.imgur.com/pJFL5SL.jpg
目前是重灌主機&用最新版VM9.0.2註冊&建立虛擬主機
但還是會隨機性跳出(就算單純開機掛網也會隨機跳出)
http://tinyurl.com/7udzty8
上面文中提到的
To resolve this issue, decrease the memory assigned to each virtual machine,
increase the amount of physical memory installed in the host, or both.
這句是指要我減少VM內的公給記憶體或是增加實機的記憶體容量嗎?
另外上面中連結提到
After installing Windows 7 SP1, VMware Workstation reports the error: Not
enough physical memory is available to power this virtual machine (1036185).
http://tinyurl.com/d5ht6ls
Not enough physical memory is available to power this virtual machine with
its configured settings
這是指我的電源無法供應足夠的電給虛擬主機?
In the vmware.log file, you see entries similar to:
vmx| VerificationOfHostParameters status 2
vmx| Failed to verify host parameters
我去看我履歷他是說
2013-03-29T21:31:31.233+08:00| vmx| I120: VerificationOfHostParameters status 0
Resolution部分
After installing Windows 7 SP1 or Windows 2008 R2 SP1 on a 64bit host, you
may experience this issue while trying to start a virtual machine. This issue
is resolved by Workstation 7.1.4. You can download the latest version of
Workstation from our Download Center.
這是說我安裝了Windows 7 SP1所以會出現的錯誤?此外Workstation 7.1.4這是指要我回
去載舊版7.1.4版本?
2個解決方法
1.You can resolve this issue by uninstalling SP1. For more information, see
How to uninstall Windows 7 Service Pack 1 (SP1) .
Note: The preceding links were correct as of March 22, 2011. If you find the
link is broken, provide feedback and a VMware employee will update the link.
但是我主機並沒有安裝Windows 7 Service Pack 1 (SP1) (KB976932)
2.To workaround this issue, you can add a setting to the config file to
restrict Workstation to using a percentage of the host's available RAM:
Shut down all running virtual machines and exit Workstation.
Open the config.ini file located at C:ProgramDataVMwareVMware Workstation.
Add this line to the file:
vmmon.disableHostParameters = TRUE
Save and close the file.
Restart Windows.
This ensures that the virtual machine uses only 75% of the host memory.
我照他在C:Program Files (x86)VMwareVMware Workstation
建立文件檔 config.ini
內文vmmon.disableHostParameters = TRUE
但還是會跳出錯誤強制關閉虛擬機
是我哪裡設錯了嗎?