官方剛寄了進度信來,看了一下原文大意
預計下週約2014年10月20日第一個iPhone 5的殼(樣品)應該就會先出來~
假如一切按計劃進行,而 iPhone 6或 iPhone 6 Plus的(樣品)殼
預計10月底第一個產品就會出來
官方的3D示意圖: http://ppt.cc/4gKs
順便請教各位大大覺得 灰色、銀色和金色個配哪個顏色的眶比較好看??
========================================
原文如下(小弟英文不好,若有重要事項的話還煩請厲害的大大補充):
Dear Backers,
We hope that you are having a great start to you week. The past four days
have been incredibly fulfilling for all of us at Evolutive Labs. We want to
thank all of our backers for helping us to reach our funding goal in under
four hours. For that we thank you from the bottom of our hearts. When you
spend hours upon hours in the lab creating something without any feedback, it
is incredibly rewarding to have received the response to the Crash Guard that
you all have provided. While it only took four hours to reach our funding
goal, please don’t think that is the end of the story. We are working around
the clock with our manufacturing partners to live up to the delivery dates
noted in our launch pitch. We want to get these bumpers in your hands as much
as you want to receive them, and we will not rest until we have accomplished
that goal. Over the coming weeks, we will continue to keep you informed as
the progress we have made, so keep checking back for the latest updates.
We hope that by the middle of next week (week of October 20, 2014) we will
have our first production samples complete for the iPhone 5 and we will be
able to use those as samples to show off the color assortment for both the
iPhone 5, as well as the iPhone 6 and 6 Plus. Assuming that everything goes
according to plan, we should have the first pre-production samples of the
iPhone 6 available by the end of October and at that time we will be able to
update the drop test videos with a clip demonstrating the product with an
iPhone 6.
You can view some early mock-up drawings of the Rhino Shield Crash Guard
bumper for the iPhone 6 here:
https://www.dropbox.com/sh/vd7splmhw4iqroo/AABd3iJTpDq4227HsCjsRauBa?dl=0#/
The Crash Guard bumper for the iPhone 6 and 6 Plus will be modeled on the
same curved edge design of the device itself, the way Apple intended for it
to appear. The bumper will elevate the device slightly so the back of the
device is not in direct contact with the surface it is resting on. This
element of the design also means that the lens of the iPhone 6 and 6 Plus
will be slightly elevated and will not be in contact with the flat surface.
As we approach 2,000 supporters for our project, the press is finally
beginning to pay attention, and we hope to have some surprises for you
shortly. Please keep sharing our story with your friends and family.
From your friends at Evolutive Labs, thanks again for your support. We wouldn
’t be able to do this without you.