※ 引述《mmonkeyboyy (great)》之銘言：
: 這又是我領域的 好啊 當然好啊
: 你這算是寫製程檔 這要懂量測和一些模型 這工作不錯其實XD
: 會做了之後可以跳德州的cadence
: 這個是要MS才對
那我就用力衝這個，最近這裡工作真的不好找，好不容易有個ic相關的職缺流出，我準備找朋友內推了。
其實蠻巧的，前陣子問您關於製程檔使用的方法以及觀念，說不定能派上用場。
但還是想問，就您的經驗來說，這工作主要重點在哪裡呢？我準備修改一下履歷，多寫上幾個相關的關鍵字，對症下藥。（還是不建議這麼做？目前我手上有個履歷是專門針對ic設計的，如圖，這份比較熟悉。回答起來我相信會很順，但就沒有太多eda相關就是了。）
https://ptt.cc/flAi1x
（很菜，沒什麼學經歷，請見諒。）
目前彈藥庫有
VLSI project(layout到standard library）
ASIC Project(Verilog 到physical design)
LNA design( 在awr mwo裡面用s parameter設計，使用s2p file)
deep learning project(水課，用python)
請指教了，謝謝。
剛剛看了幾個skill對cadence的範例，起床準備惡補一下...
: ※ 引述《joseph0911 (約瑟芬)》之銘言：
: : 好 那這兩個我都先申請。
: : 那這個 Eda /pdk /adk engineer呢？
: : @qorvo
: : 是否完全沒機會？乾脆就別丟了。
: : 有看了大概介紹，但還是想問工作內容大概是什麼呢？
: : （有coding經驗，但不是寫純軟那種，都是寫一些C的程式）
: : （以下從網站複製貼上）
: : SUMMARY:
: : The successful candidate will join a small team of EDA/PDK engineers enabling software tools used in the design flow for RF-ICs, modules and packages. The position will involve development and ma
: : RESPONSIBILITIES:
: : Develop and maintain PDKs/ADKs and support infrastructure for use with Keysight’s Advanced Design System (ADS), Cadence's Virtuoso and MicroWave Office (MWO) for design of custom Radio Frequency
: : Module technologies include SAW/BAW IC, Laminate, GaAs/GaN IC & Si IC
: : Implement Calibre DRC and LVS rule sets
: : Develop and manage IP Block Library structure
: : Support and enhance the engineering design flow from schematic design entry and simulation to layout, Electromagnetic simulation, design verification and tape out
: : Create project specifications and requirements in cooperation with engineering teams
: : Provide training, assistance and direct interface with external and internal customer designers/users of the EDA infrastructure (PDK/ADK/DRC/LVS) working in a heterogeneous environment (Windows a
: : Provide training, assistance and direct interface with external and internal customer designers/users of the EDA infrastructure (PDK/ADK/DRC/LVS) working in a heterogeneous environment (Windows a
: : Maintain EDA infrastructure and assist engineers in the installation and setup of EDA tools
: : Develop scripts to automate design engineering problems
: : Build and maintain SharePoint sites for the EDA team
: : QUALIFICATIONS:
: : Bachelor's degree in Electrical Engineering, Computer Engineering, or Computer Science (or equivalent and relevant experience)
: : 2 or more years of experience in the field of Electronic Design Automation (EDA) is required
: : Proficiency in writing Linux shell scripts, VB, C/C++, PERL, Python and general programming is required
: : Effective interpersonal communication and documentation skills are required
: : Familiarity with any or all of the following design tools is required: Cadence MicroWave Office (MWO), Ansys HFSS, Keysight ADS, Cadence Virtuoso, Mentor Pyxis.
: : Experience developing and supporting programming infrastructure for any or all of the following design tools is desired: Keysight ADS, Cadence Virtuoso, Cadence MWO, Ansys HFSS etc.
: : Experience with high performance RF IC and/or module design verification, including DRC and LVS, is desirable
: : Experience with writing SKILL, Ample and/or AEL scripts is desired
: : Prior experience with EDA development and support of packaging technologies will be a plus
: : Experience with system administration for heterogeneous computing (Linux/UNIX) is desired
: : Experience in developing process design kits for Cadence Virtuoso, ADS and/or MWO
: : Experience in developing Calibre and/or Assura DRC or LVS rule sets for IC processes

你可以私信，還是這是工程師的西斯？好大膽唷！

@@"

樓下硬了沒?

這篇的西斯點可能只有電腦看得懂...

電腦被他的彈藥庫擊中，要懷孕了...

射在電腦裡

這什麽鬼啦

工程師看到程式碼就可以看到正妹

？？？？？

程序碼式高潮。

應該是按錯了或是被軟體出賣

伺服器要怀孕惹